Technical specifications - Power supply- 120 volt single cord, 14.1 amp 1700 watts (will NOT blow breakers)
- Boiler- stainless steel AISI 304 12/10 commercial gage
- Boiler temperature- 311 degrees internal
- External tip temperature- 284 degrees
- Operating pressure- adjustable to 72 PSI
- Boiler capacity- 2.7 liters or 2.85 quarts
- Injector (extractor) capacity- 1.5 liters or 1.59 quarts
- Heating time- approximately 10-12 minutes to heat a full tank (2.85 quarts)
- Operating time before refilling- approximately 2 hours nonstop if steam is being constantly applied
- Water collection (waste) tank- 4 liters or 4.23 quarts
- Vacuum- 2 stage adjustable with a large 2 inch diameter hose with great lift and suction
- Oversized 17 foot electrical cord
- Optimal 8 foot hose for exceptional sanitization based on laboratory tests
- Steam and extraction buttons on the handle designed for stress-free operation.
- Standard Detachable Hose
- Pressure Gauge
- Adjustable pressure regulator
- Full range adjustable vacuum level of suction
- Steam - Vacuum - Inject Simultaneously - or separately
- Highly manageable 11.5 wide x 18.5 high x 14 long
- 30 lb weight with boiler filled
- High Impact ABS Exterior
No other steam extraction system on the market in a standard 110 electrical outlet can produce the high dry steam temperature and extraction and vacuum capability as the Desiderio. |
